Se afișează postările cu eticheta export to tape. Afișați toate postările
Se afișează postările cu eticheta export to tape. Afișați toate postările

01 iulie 2015

deblocare DV-in pe camera video Sony DCR-PC3E si alte modele de camere video



deblocare DV-in pe camere video Sony (adica ai rec de pe un soft ,cum ar fi Avid sau etc, "export to tape") . eu am facut deblocat un Sony DCR-PC3E
e mult de citit , dar daca te pricepi , te descurci... modfici in hexa , cateva chestii pe portul LANC , cuplat la portul LPT de la un calc mai vechi. (printr-o interfata simpla cu un tranzistor) (mare grija ce faci in hexa pe acolo) (am pus cu copy paste din calcul meu  cateva pagini salvate , de aia arata asa incomplete...)

inca o data : MARE ATENTIE LA TABELELE HEXA !!! POTI BUSHI TOT .. pe riscul tau...











 Tout d'abords GRAND MERCI ŕ un inconnu trouvé ICI
Je ne fais que reprendre son site en y mettant un peu plus d'infos.
Pour le canon MV20 ça ce passe pas ICI, c'est en Francais maintenant.
C'est donc un petit programme qui tourne sous PC Windows 9x et qui est une émulation de RM95.
Télechargement du Programme ici : dvin.zip
Il faut fabriquer un cable Selon le schéma ci-desous.
     

     Accessoires : 
    • 1 Connecteur 25 broches male pour port parallele,
    • 1 Connecteur mini jack 2,5 Stéréo,
    • 1 mčtre de câble audio,
    • 1 transistor NPN Réf. BC238 ou 2N2222.


    Le câble doit-etre connecté directement sur le port paralčele, et non pas aprčs un accessoire (Imprimante, ZIP ...).
     
  • Unzipper dans un répertoire le fichier reccuperé plus haut.
  • Connecter la prise jack ŕ la prise Lanc du caméscope
  • Mettre le caméscope en mode Player.
  • Lancer le programme "DVin.exe".
Premiere boite de dialogue du programme
Le bouton "config", différents choix sur le port parallčle
  • LPT1 (defaut)
  • LPT2
  • Adresse : 0378
  • Adresse : 0278
  • Adresse : 03BC
  • Adresse : 02BC




Boutons d'enregistrement sur la télécomande : Vous pouvez aller voir plus en détail cette manip. sur le site du Repaire .
Les caméscopes TRV7, PC7 , PC10 et télécommande  814 des Digital 8 possčdent en bas a gauche 2 touches supplémantaires qui permettent de lancer l'enregistrement d'un signal d'entrée en mode "Player".
Pour ouvrir le boîtier de la télécommande et pour ne pas le détériorer il faut retirer les piles et
 tordre le boîtier en le vrillant légčrement, ce qui libéreras les clips. Inutile d'utiliser un tournevis.
Il faut découper les trous dans le film qui recouvre le boîtier pour les 2 touches en bas a gauche.
Sur le pavé de commande souple, coller 2 bouts de caoutchouc en forme de touche sur les  2 emplacement en bas a gauche. Découpées les par exemple dans un joint de robinet - et coller les avec de la colle contact (Cyanoacrylate / Glue...).
Refermer le boîtier ainsi modifié.
Il faut appuyer simultanément sur les 2 touches avec le caméscope en mode "Player"
Et maintenant le liste des codes pour differents caméscopes :
Digital 8: / TR7000E,  TR7100E, TRV110E,  TRV210E,  TRV310e, TRV410E,TRV510E
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
14
A1
A3
Active l'enregistrement
0D
15
18
1B
Active l'entrée analogique
0D
27
22
23
Active le DVin
00
01
01
00
Bloque l'écriture des pages
VX700E,  VX1000E
Attention pour les VX1000E seulement les caméscopes avec un numéro de série inférieur ŕ 423xx sont activables
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
11
44
14
Active le DVin et l'enregistrement
00
01
01
00
Bloque l'écriture des pages
Passe le code de la télécommande infrarouge en code VTR2. Pour utiliser la touche enregistrement
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
03
00
40
Passe en code VTR2
00
01
01
00
Bloque l'écriture des pages
VX9000E
Attention pour les VX9000E seulement les caméscopes avec un numéro de série inférieur ŕ 159xx sont activables
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
11
84
14
Active le DVin et l'enregistrement
00
01
01
00
Bloque l'écriture des pages
DSR200P
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
11
C4
54
Active le DVin et l'enregistrement
00
01
01
00
Bloque l'écriture des pages
SC100
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
14
16
17
Active l'enregistrement
0D
15
01
03
Active le DVin
0D
1A
71
F1
0D
21
40
C0

00
01
01
00
Bloque l'écriture des pages
PC1E
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
14
24
26
0D
15
B8
BB
0D
27
02
03
00
01
01
00
Bloque l'écriture des pages
PC2E, PC3E
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
14
24
26
0D
15
38
3B
0D
27
12
13
00
01
01
00
Bloque l'écriture des pages
PC7E
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
14
44
46
Active le DVin
0D
1C
11
13
Active l'enregistrement
00
01
01
00
Bloque l'écriture des pages
Petit plus pour le PC7E: Zoom digital de 90 x a 120 x (?)
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0F
1B
CD
CF
Elargis le zoom digital
00
01
01
00
Bloque l'écriture des pages
TRV7E
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
14
56
57
Active l'enregistrement
0D
15
01
03
Active le DVin
00
01
01
00
Bloque l'écriture des pages
TRV8E/TRV10E
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
14
24
26
0D
15
38
3B
0D
27
12
13
00
01
01
00
Bloque l'écriture des pages
TRV9E
Attention pour les TRV9E seulement les caméscopes avec un numéro de série inférieur ŕ 525xx sont activables
Il y a une procédure pour activer l'entrée DV mais Il semble qu'elle ne soit pas permanente aprčs coupure du caméscope, par contre elle peut ce faire autant de fois que nécessaire.
        1. Allumer la caméra en mode "Player"
        2. Entrer les codes
Voilŕ l'entrée est activée.
        3. Faites les enregistrement souhaités
        4. Eteingner la caméra, ceci vas désactiver l'enregitrement DV (les codes sont remis comme ŕ l'origine)


Voici les codes :
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
14
5E
5F
0D
15
81
85
Hi8 Model : TR780E
PAGE
ADDRESS
Original
Nouveau
Observation
00
01
00
01
Autorise l'écriture des pages
0D
17
06
17
00
01
01
00
Bloque l'écriture des pages







 
Page updated   2004 April 19.
LANC, DV-IN, ANA-IN
 
Specifications and designs are subject to change without notice.
Use on your own risk.   All rights reserved by authors.
 
 
Control_L  -  Digital8 & DV remote control
Stand alone remote control will add RECORD button to digital cam in VTR mode
->
LANC-1  (Assembled, preprogrammed, in box, ready to use) Secure Order
EU models of D8 and DV camcorders don't have DV-IN & ANALOG-IN enabled. This can be done using service tools : RM95, PC95 softwareLremote software, or doit your self with one of free DV-IN tools. After dangerous job is done your D8 camcorder won't support only DV IN on FireWire (IEEE-1394), but ANALOG IN (on normal analog output conn.) too. Ideal for recording analog ATV transmissions, video tests, etc, all in digital mode. But there is no RECORD button in VTR mode on your EU camcorder. At home you can use PC with software for controling. But what can we do on remote locations?  Driving PC with camcorder ?  No, for shure not. The tiny microprocessor remote controller LANC1 will do the job well. With two pushbuttons you can start VTR Recording, and Pause Recording. The same time VTR buttons on camera working too (Stop, Pause, Rewind, Play, ..). Remote controller is compatible with all models of SONY D8 & SE D8 camcorders, most of SONY DV (and miniDV) & Hi8/Video8 camcorders.
NOTE: camcorder must be DV-IN / ANA-IN enabled before LANC-1 remote can be used.
 
 
How to enable LANC-1 for CAM mode
LANC-1 as delivered is ready for use in VTR mode. CAM (camera) and VTR (videorecorder) modes uses different record comand sequences. If you like to use device in CAM (camera) mode, two step  modification is needed. Carefuly open remote (screw on backside). Step 1:  cut (break) PCB line marked with RED on picture. Cut should be at least 1mm wide. Step 2: use wirewraping or similar tiny (isolated) wire and conect REC pushbutton with corner pin (pin10) of LANC-1 CPU, using soldering tool. That's all. Software support for CAM REC mode is already built in any LANC-1 remote. 
Do not try to solder wire without going thru 1.step (cuting PCB line). That way CPU will be destroyed.
Avoid any static discharges !  Device is static sensitive!
 
1999-11-25  S5  LANC - Krmiljenje digitalnih video kamer S5LANC.PDF
1999-11-25  LANC1 - User manual LANC1.PDF
LANC-1  (Assembled, preprogrammed, in box, ready to use) Secure Order



Automatic DV-IN enabling soft. for one camcorder (Digital8 & DV Link to Lremote package
Link to AutoPC95 software DV-IN enabling software.

LANC control - PC LPT :  


             Click on picture above. Full operational adapter with BS-170
Make adapter,download software, unzip it, connect camcoder with adapter to LPT1 ( LPT must be drivers free) and run EXE file. This cable will work on free DV-IN tools, as well on comercial ones.
Part list: 1 x DB25M (male) for LPT, 1 x minijack 2,5" Stereo, 1 x FETtransistor BS170 , cca 1m mono coaxial audiocable (1+GND).
 
ALL IS ON YOUR OWN RISC and for education only!

 

Download folowing  3rd party  free DV-IN software for SONY, PANASONIC, JVC :
 
DVinD8se SONY SE D8, RAM version. DCR-TRV 120,320,520,720,820
v1.01 written by Martin Smola     home page
DVinLITE15
DVinLITE16
DVinLITE17
SONY RM95 emulator 
v1.5 written by Martin Smola     home page
v1.6 & 1.7 with emergency button !!!
ANIN 1.5
ANIN 1.6
SONY D8, RAM version. DCR-TRV 7000,110,210,310,510
v1.6 written by Martin Smola     home page
PANA Test 1.0
PANA Test 2.0
PANA List
PANASONIC Read/Write data out of DV camcorders
written by Michal Krejcik     home page
RM95 ** NEW **
RM95EMGY
LANC RM95DUMP for memory DUMPs & RM95EMUL  (DOS)
written by Helge Wagner
Usage: "RM95DUMP > FILENAME.TXT" & use cable above LANC RM95EMGY emergency program - the same functionality as the "emergency" button of the "DVin lite" program (it will set page 0x02 address 0x25 to 0x80). Sources are included. To build the program, some other files from the RM95 packet are needed.
written by Helge Wagner
JVC-EM 1.1
JVC-EM 2.0 beta
JVC-EM 2.0 final
JVC-EM 2.1 beta
JLIP 1.0 beta
JVC EEPROM & DV-IN  manager for DV camcorders
written by Paulo Ramos     home page Note: v2.1 is an BETA release, changing daily!
Jump on authors web page for latest one.
Note: JLIP is an debuger   Paulos home page.zip
Video Pages < interesting DV-IN related LINKS
oSamsung info < DV-IN related VP-D55/60/63/70/73/75/77 and similar Medion-camcorders by Wolfi1000
NOTE: only LEGAL - non pirated  software can be hosted here,
info must include valid authors Email & home page.
 
! ! !  DANGER  ! ! ! Second edition Sony D8  cams uses other DV-IN data  & cheksum !
2000-08-23     Q&A-01 :
2000-09-19     Q&A-02 :
2000-10-06     Q&A-03 :
2000-10-08     Q&A-04 :
2001-03-15     Q&A-05 :
2001-06-19     Q&A-06 :
2001-07-17     Q&A-07 :
Enabling D8, DV cam. And if something goes wrong...
Where is the old JVC-IN pack gone ?
How to record in LP mode on to standard 8mm tape ?
How to calculate CHEKSUM on 1st edition D8 ?
DV-in problem. Can you help?
DV-IN enable for the SONY PC4/PC5
Checksum calculator for Sony D8 SE..       XLS file



Camcorders that can not be DV-IN enabled: Canon MV5, MV500, MV530, MV550
Grundig DLC1505
JVC GR DV1, DV3, DVF1, DVF10, DVJ70, DVL155, DVL160, DVL165, DVL200, DVL365, DVL400, DVL765, DVL865, DVL9000, DVM1, DVM5, DVP1(in service only), DVP3, DVP5, DVX, DVX400, DV500E (in service only)
Panasonic NV DS29, DX1, GS1, MX2
SONY DCR IP55, PC10E, TRV16E, TRV18E, TRV24E, TRV130E+140E (in service only), TRV238E, TRV239E, TRV340E, TRV733E, TRV738E
Thomson VMD712, VMD912

         

CAMCORDER MEMORY DUMP
Do you have any complete camcorder memory dump ?
No? Use RM95DUMP.EXE and drop me a mail.
(attach info about DV-IN state, plus if you grant publishing of your identity)
 
 
DCR-TR7000 D8 TR7000E   before enabling  DV-IN  (factory setup)
TR7000 NTSC (US)  DV-IN enabled  (factory setup)
DCR-TR7100 D8 TR7100E   before enabling  DV-IN  (factory setup)
DCR-TRV210 D8 TRV210E   before enabling  DV-IN  (factory setup)
TRV210E   after enabling  DV-IN, ZEBRA, White bal., etc
TRV210 NTSC   factory setup
TRV210 NTSC   after enabling  ZEBRA, White bal., etc
DCR-TRV310 D8 TRV310     NTSC USA   DV-IN enabled (factory setup)
TRV310E   before enabling  DV-IN  (factory setup)
TRV310E   before enabling  DV-IN  (factory setup2)
DCR-TRV410E D8 TRV410E   before enabling  DV-IN  (factory setup)
TRV410E   after enabling  DV-IN
DCR-TRV510 D8 TRV510E   DV-IN disbled (factory setup)
TRV510     NTSC English  DV-IN enabled (factory)
DCR-TRV8000E SE Sony D8 TRV8000E   before enabling  DV-IN  (factory setup)
TRV8000E   enabled  DV-IN / ANA-IN / pass trough
DCR-TRV8100E SE Sony D8 TRV8100E   before enabling  DV-IN  (factory setup)
DCR-TRV120E SE Sony D8 TRV120E   DV-IN disabled  (factory setup)
TRV120E   DV-IN disabled 2 (factory setup)
TRV120E   DV-IN enabled  (factory setup)
TRV120E   (Australia) DV-IN enabled  (factory setup ++)
DCR-TRV125E SE Sony D8 TRV125E   before enabling  DV-IN  (factory setup)
TRV125E   before enabling  DV-IN  (factory setup)
TRV125E   after enabling  DV/ANA-IN
DCR-TRV320E SE Sony D8 TRV320E   before enabling  DV-IN  (factory setup)
TRV320E   after enabling  ZEBRA patern (no DV/ANA-IN!)
TRV320E   after enabling  DV/ANA-IN
TRV320E   after enabling  DV/ANA-IN, ZEBRA patern
DCR-TRV325E SE Sony D8 TRV325E   before enabling  DV-IN  (factory setup)
DCR-TRV420E SE Sony D8 TRV420E   before enabling  DV-IN  (factory setup)
TRV420E   after enabling  DV/ANA-IN
DCR-TRV520E SE Sony D8 TRV520E   before enabling  DV-IN  (factory setup)
TRV520E   after enabling  DV/ANA-IN
DCR-TRV620E SE Sony D8 TRV620E   DV-IN enabled  (factory setup)
DCR-TRV725E SE Sony D8 TRV725E   before enabling  DV-IN  (factory setup)
DCR-TRV230 TE Sony D8 TRV230E    before enabling DV-IN (factory setup)
TRV230     NTSC   DV-IN enabled (factory setup)
DCR-TRV238E TE Sony D8 TRV238E    before enabling DV-IN (factory setup)
DCR-TRV430E TE Sony D8 TRV430E   before enabling  DV-IN  (factory setup)
TRV430E   after enabling  DV/ANA-IN
DCR-TRV530E TE Sony D8 TRV530E   before enabling DV-IN (factory setup)
TRV530E   after enabling DV/ANA-IN
DCR-TRV730 TE Sony D8 TRV730     NTSC Asia   DV-IN enabled (factory setup)
TRV730     NTSC Asia   additional funct. enabled
TRV730     NTSC USA   DV-IN enabled (factory setup)
DCR-TRV240E FE Sony D8 TRV240E  DV-IN ANA-IN enabled  (factory setup)
DCR-TRV340E FE Sony D8 TRV340E   before enabling DV-IN (factory setup)
TRV340E   2. before enabling DV-IN (factory setup)
TRV6E MiniDV TRV6E   1 before enabling  DV-IN  (factory setup)
TRV6E   2 before enabling  DV-IN  (factory setup)
TRV6E   2 after enabling  DV-IN
TRV7E MiniDV TRV7E   before enabling  DV-IN  (factory setup)
TRV7E   after enabling  DV-IN
TRV8E MiniDV TRV8E   before enabling  DV-IN  (factory setup)
TRV8E   after enabling  DV-IN
TRV9E MiniDV TRV9E   before enabling  DV-IN  (factory setup)
TRV9E   after enabling  DV-IN
TRV9E   after enabling  DV-IN
TRV10E MiniDV TRV10E   after enabling  DV-IN
TRV11E MiniDV TRV11E   before enabling  DV-IN  (factory setup)
TRV15E MiniDV TRV15E   before enabling DV-IN (factory setup)
TRV15E   after enabling DV-IN
TRV17 MiniDV TRV17  NTSC (US)  DV-IN enabled  (factory setup)
TRV20E MiniDV TRV20E   DV-IN enabled  (factory setup)
TRV900 MiniDV TRV900  NTSC (US)  DV-IN enabled  (factory setup)
PC1E MiniDV PC1E   before enabling DV-IN  (factory setup)
PC2E MiniDV PC2E   before enabling DV-IN  (factory setup)
PC2E   before enabling DV-IN  2 (factory setup)
PC2E   after enabling DV-IN  2
PC3E MiniDV PC3E   after enabling DV-IN
PC4E MiniDV PC4E   before enabling DV-IN  (factory setup)
PC5E MiniDV PC5E   before enabling DV-IN  (factory setup)
PC5E   after DV-IN  enabled
PC5E   2-before enabling DV-IN  (factory setup)
PC5E   2-after DV-IN  enabled
PC6E MiniDV PC6E   before enabling DV-IN  (factory setup)
PC6E   after DV-IN & Zebra  enabled
PC7E MiniDV PC7E   after DV-IN  enabled
PC100E MiniDV PC100E   factory enabled  DV-IN
PC110E MiniDV PC110E   factory enabled  DV-IN
SC100 MiniDV SC100 NTSC  factory enabled DV-IN
DCR-VX700E MiniDV VX700E  PAL   before DV-IN enabled  (factory setup)
VX700E  PAL   after DV-IN enabled 
DCR-VX1000 MiniDV 
3CCD
VX1000  PAL  ser.nr.12xxx   DV-IN enabled
VX1000  PAL  ser.nr.218xx   after DV-IN enabled 
VX1000  NTSC Japanese  DV-IN enabled (factory)
VX1000E  PAL  ser.nr.363xx   before DV-IN enabled 
VX1000E  PAL  ser.nr.363xx   after DV-IN enabled 
DCR-VX9000 Full sizeDV 
3CCD
VX9000  PAL  before DV-IN enabled & howto enable! 
CCD-TRV65E Hi8 TRV65E   before enabling  ANA-IN  (factory setup) + code
CCD-TRV66E Hi8 TRV66E   before enabling  ANA-IN  (factory setup)
TRV66E   after enabling   ANA-IN
CCD-TRV94E Hi8 TRV94E   before enabling  ANA-REC  (factory setup)
CCD-TRV940 Hi8 TRV940  NTSC  (US)  ANA-IN enabled (factory setup)
CCD-TR3000 Hi8 TR3000  NTSC English  ANA-IN enabled  (factory setup)
CCD-TR3300 Hi8 TR3300E  before  ANA-IN enabled  (factory setup)
JVC GR-DVX 7 JVC  MiniDV JVC GR  DVX 7  DV-IN enabled  (factory setup)
JVC GR-DVL107 JVC  MiniDV JVC GR  DVL 107  DV-IN enabled  (factory setup)
JVC GR-DVL150 JVC  MiniDV JVC GR  DVL 150   after DV-IN enabled
JVC GR-DVL355E JVC  MiniDV JVC GR  DVL 355E   before enabling  DV-IN ( factory setup)
JVC GR  DVL 355E   after DV-IN enabled
Panasonic DS-99 MiniDV PANASONIC DS-99  after DV-IN enabled



If you grab these DUMP files for your ftp or html server, be at least so honest to drop me a note.

Temporary enable COLORBAR (Zebra patern) on any SE D8
(TRV8000E, 120E, 320E, 520E, 620E, 820E)
1.-   switch camcorder in to CAMERA mode
2.-   page 00  adr 01   set from 00 to 01  And DON'T EXECUTE  STORE command !
3.-   page 0D  adr 1E   set from 24 to A5  And DON'T EXECUTE  STORE command !
New option called COLORBAR became visible in camera menu OTHERS.
Switch option ON and Colobar is there. Until... you disconnect your power supply.
No risiko - all changes hapend in RAM area only.


Enable COLORBAR (Zebra patern) on  Cannon XL-1
1.-   Turn the dial to the "green rectangle" which is auto everything.
2.-   On the little arm that hangs down on the left side of the camera there are 
two buttons that control the shutter speed. Hold those two buttons 
down for approx. 5 seconds and you got bars.
3.-   To turn them off, hold down the same two buttons for approx. 5 seconds.
They are not SMPTE bars and are not extremely accurate for the colors they represent.
They are only a rough approximation.

 

SE D8 remote info:  EU RMT-814 can be enabled for VTR REC
RMT-814 seems to use the same hardware as RMT-808 (on right side)
NOTE:  S51KQ's  LANC-1 remote will operate on SE D8 very well, too.

 


Enable SAMSUNG VP-D55/60/63 or Medion (Aldi)  MiniDV cam (thanks to Wolfi1000)
This is a procedure that works for the Samsung VP-D55/60/63 I have 
also (different) infos for VP-D70/73/75/77 and similar 
Medion-camcordersor Medion (Aldi) MiniDV cam and should be similar for others (but take care!)  1. switch on your camcorder in playmode (a cassette should be inside) and look at the TFT-display. 
2. Press "Play" and "Down" buttons at the same time (at the side of the camera below "Enter") to get into service mode ;-) 
3. Press "Stop" to prevent the tape from running further 
4. Take your remote controll and press the red button until "OPTIONS" is shown on the screen. 
5. Write down the HEX number which ist shown behind options in case you want to switch back later. 
6. Now press "Wide" or "Tele" on your remote controll to increment or decrement the Hex number to "FE"
7. Press the red button again to store the number
8. Disconnect your camara from all electric sources (e.g. battery or plug) 
... and you're done! 
My remarks: The Down-Button for the VP-D55 is under the TFT (Up/Enter/Down..). You have to press the Play + Down Button for 10 seconds to switch in to service mode.
Samsung VP-D55/60/63/70/73/75/77 and similar Medion-camcorders, service manuals on http://free.hostdepartment.com/w/wolfi1000/samsung.html
S51KQ note: instead of original IR remote you can try to use remotes from other Samsung MiniDV cams.






  3rd party  DV-IN  CODES
Not all verified by S51KQ
Be careful by using PAL codes on NTSC models !
After changing the codes, switch the camera off, remove battery and pull_out LANC cable !
All changes & modifications are on Your own risk !


1st edition D8 :  TR 7000E, 7100E, 110E, 210E, 310E, 410E, 510E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 A1 A3 enable record
D 15 18 1B enable DVin
D 27 22 23 cheksum
0 01 01 00 install write protection

Other functions on TR 7000E, 7100E, 110E, 210E, 310E, 410E, 510E

Note: TR7000E & 7100E uses different  data on adr. 1E & 20 (green area)
Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 A1 A3 enable record
D 17 77 F7 enable gain & exposition changing
D 18 40 60 Zebra warning patern if overexposed 
D 1E 89 8B enable White balance mode (auto/indoor/outdoor/hold)
D 1E 88 8A enable White balance mode (auto/indoor/outdoor/hold)
D 20 0F 1F LaserLink function
D 20 0B 1B LaserLink function
D 23 00 3B cheksum
D 24 01 19 enable Frame & Interval rec 
D 25 00 81 enable Colorbar in cam mode
D 26 00 10 enable DV-editing function
D 27 22 23 cheksum
0 01 01 00 install write protection

 

2nd edition D8 :  TR 8000E, 120E, 125E, 320E, 520E, 620E, 820E   Tested on TRV 320E, only

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 24 26 enable record & DV/ANA in
D 23 A9 AB enable White balance control
D 2C 22 63 (TRV 320E ) OK
26 (TRV 120E,125E) ??
cheksum  Depend on other existing data too!
0 01 01 00 install write protection
Note: Please send me reports if you find these codes to be operational on other type of SE D8 cameras.
 

3rd Edition D8 - other functions on TRV 730  NTSC (Asia)

Henry Y. wrote:  I have succeeded in modifying TRV-730 (Asia). A lot of changing method and address is similar to TRV-x20 series and the checksum compensation address is 2A (in page D).
 
Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 16 07 17 Interval REC (Frame REC not fonduded)
D 17 18 48 WIND
D 1A 37 B7 Manual exposure value display
D 1B 40 60 Zebra
D 1E 34 B5 Colorbar
D 23 B9 BF White balance & Mic
D 2A 00 67 cheksum compensation
0 01 01 00 install write protection

 

PC1E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 24 26 enable DVin 
D 15 B8 BB enable record
D 27 02 03 cheksum 
0 01 01 00 install write protection

 

PC2/3E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 24 26 enable DVin
D 15 38 3B enable record
D 27 12 13 cheksum 
0 01 01 00 install write protection

 

PC4E  - Other functions on PC4E


Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 16 06 0E enable Frame Rec
D 1B 40 60 enable Zebra
D 1E 64 E5 enable Colorbar
D 23 0B 0F manual Mic gain
D 2C 13 13 enable ESP/ELP recording modes (Already on?)
D 29 40 4C enable new Memory stick recording mode (Not applicable to PC4)
D 31 00 A1 checksum
0 01 01 00 install write protection
Your site has table of codes for the PC5E. Being highly interested in these features, I (Mattias Hult) decided to give it a try on my PC4E, which is identical to the PC5E except for memory stick. The codes worked fine in RAM mode, but when I tried them in EPROM the camcorder locked up. Thanks to Martin Smola's excellent DVin lite unlocking it was easy. Since the codes worked in RAM, I figured it was a problem with the checksum. Also, D:2C was set to 13 from the beginning in my camcorder, and not to 12 as was stated in your table. After some trial and error, I managed to get it working with the checksum set to A1. So, for PC4E, the table should look like shown above.
I realise that this might not work with all PC4Es. In case of trouble, one should experiment with different checksums. This is (relatively) easy with the convenient emergency feature in DVin lite.
 

PC5E  Atention: the Cheksum code is missing here

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 24 26 enable DVin
D 15 01 03 ??
0 01 01 00 install write protection

Other functions on PC5E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 16 06 0E enable Frame Rec
D 1B 40 60 enable Zebra
D 1E 64 E5 enable Colorbar
D 23 0B 0F manual Mic gain
D 2C 12 13 enable ESP/ELP recording modes
D 29 40 4C enable new Memory stick recording mode
D 31 00 A7 cheksum ??
0 01 01 00 install write protection
ATTENTION: Avant d'éteindre le camescope bien s'assurer que les datas F0 et F1 de la page 2 soient respectivement à D5 et 04. (2:F0=D5 et 2:F1=04)
 

PC5E  Another posibility to get permanent DV-IN    Drop me a note if works on your camera.

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 24 26 enable DVin
D 2C 12 13 enable ESP/ELP recording modes
D 31 00 03 cheksum ??
0 01 01 00 install write protection

PC7E

Page Adress Original Data Modified Data Action
1 00 00 01 remove write protection
D 14 44 46 enable DVin 
D 1C 11 13 enable record
1 00 01 00 install write protection

Digital Zoom to 90 (120 ?)

Page Adress Original Data Modified Data Action
6 00 00 01 remove write protection
F 1B CD CF larger digital Zoom
6 00 01 00 install write protection

 

TRV5E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 4E 4F enable DVin
D 15 81 83 enable record
D 1A 73 70 cheksum
0 01 01 00 install write protection

 

TRV6E    Temporary enable DV-IN

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 24 26 Don't press on STORE !
D 2C 12 13 Don't press on STORE !
0 01 01 00 install write protection

 

TRV7E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 56 57 enable record
D 15 01 03 enable DVin
0 01 01 00 install write protection

 

TRV9E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 5E 5F enable record
D 15 81 83 enable DVin
D 1A 73 70  
0 01 01 00 install write protection

 

TRV 8E / 10E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 24 26 enable record
D 15 38 3B enable DVin
D 27 12 13 cheksum 
0 01 01 00 install write protection

Other functions on TRV 8E / 10E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 18 40 60 enable Zebra
D 1E 8B 8F manual Mic gain
D 24 01 19 enable Interval & Frame rec
D 29 BF 83 cheksum
0 01 01 00 install write protection

 

TRV890E

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 25 27 enable record
D 15 38 3B enable DVin
D 27 42 43 cheksum
0 01 01 00 install write protection

 

SC100

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 16 17 enable record
D 15 01 03 enable DVin
D 1A 71 F1  
D 21 40 C0  
0 01 01 00 install write protection

 

VX700E / VX1000E

Page Adress Original Data Modified Data Action
1 00 00 01 remove write protection
D 11 44 14 enable DVin and record
1 00 01 00 install write protection

Change Infrared Remote Control code to VTR2

Page Adress Original Data Modified Data Action
1 00 00 01 remove write protection
D 03 00 40 change to VTR2 code
1 00 01 00 install write protection

 

VX9000E

Page Adress Original Data Modified Data Action
1 00 00 01 remove write protection
D 11 84 14 enable DVin and record
1 00 01 00 install write protection

 

DSR200P

Page Adress Original Data Modified Data Action
1 00 00 01 remove write protection
D 11 C4 54 enable DVin and record
1 00 01 00 install write protection

 

CCD-TRV65E  Hi8

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 64 66 enable record
D 21 00 02 cheksum
0 01 01 00 install write protection

 

CCD-TRV87E  Hi8

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 14 65 67 enable record
D 1E A9 AB enable ANAin
0 01 01 00 install write protection
Note: Codes out of the DCR-TRV110E set were used to enable this camera.  You can use the LANC1 or a remote commander with REC function to start the recording, ofcorse in player mode. You can also use a button placed on camcorder for starting the recording. This button must be between to pin 93 of IC803 of the VC-234 board and with 4,7K resistor to ground. The button must be pushed at least 1 sec. to start recording.
 
 

TR780e  Hi8

Page Adress Original Data Modified Data Action
0 01 00 01 remove write protection
D 17 06 17 enable record
D 15 18 1B enable ANAin
D 27 22 23 cheksum 
0 01 01 00 install write protection

  PANASONIC camcorder (use PANATEST 1)
 
Model Page Address Code En. Code Dis. Comment
DS77 0 F8 42 42 Identification
  0 F7 01 or 81 19 or 99  
  0 30 23 33
DA1 0 F8 62 62 Identification
  0 F7 00 18  
  0 30 EF FF
DS33 0 F8 72 72 Identification
  0 F7 01 19  
  0 30 23 33
EX1 0 F8 82 82 Identification
  0 F7 01 19  
  0 30 23 33  
DX100 0 F8 A2 A2 Identification
  0 F7 00 18
DS5 0 F8 B2 B2 Identification
  0 F7 00 18
DS1 0 F8 C2 C2 Identification
  0 F7 A0 B8

  For camcorders below use PANATEST 2
 
Model Page Address Code En. Code Dis. Comment
DS99 0 F7 A0 A0  
  0 DD 2C 3C  
  1 97 02 12
DS11 0 F7 68 68  
  1 97 03 13
EX3 0 F7 A0 A0  
  0 DD 2C 3C  
  1 97 02 12
DS8 0 F7 68 68  
  1 97 83 93
DS35 0 F7 A0 A0  
  0 DD 2C 3C  
  1 97 02 12
DS55 0 F7 A0 A0  
  0 DD 2C 3C  
  1 97 02 12
DS15,DS25 0 F7 A0 A0  
  0 DD 2C 3C  
  1 97 07 17
Back to HARDWARE area
| Top | Home | E-MAIL | What's NEW |
| ATVS | REPEATERS | DVMS | NET | PACKET RADIO | BROADCASTING |
| HARDWARE & SOFTWARE | DV-IN | DV-NLE | CD | VIDEO|
This page is maintained by: Mijo K., S51KQ
 
 
 







KKLANC
SONY LANC MANAGER


Program is working only in DOS mode from a bootable disk

Please test new macro & dump speed
first two macro are are not dangerous.
Basically You can create Your Custom
Set of commands adding rows to lanc.mac file.
A row  start with + and ends with *
three commands implemented:

W = Write current selection in EEPROM
G0F34 = Goto page 0F address 34
 SXX = Write XX in current pointed address

---------------------

All RM95 functions
Plus ability to create and execute
lanc command (for camcorder ?)
Plus memory dump
Plus command scan
Plus macro parser !!!!!
 Donations are Welcome

My activity is currently freeware if you want to contribute to this project,
you can do it very simply using standard paypal:
PayPal
   
Email me to discuss any technical  issue kksmafgp@tin.it


O


Cable schema for connecting Your camera to PC in DOS






RAW  INFO FROM FORUM


Lanc Sony Setting Universe Part 1
-----------------------------------

Some info for brave people thinking
to start a new voyage into
their own camera setting universe ;-))))

Please sorry for my english ,
I'm writing from Italy (North Mountains).

First of all consider to buy the Service Manual
of your camera from Sony or from the link below.
It could be a good idea..

Sony uses a protocol called Lanc, able to control
all their video & camera with a Sony remote control
called RM95.

This device, used by Sony Service connects the camera
via a mini-stereo-jack plug normally jacked into
the flash plug.

This RM95 is not available from Sony, but
there are some people that emulate it via
software, for example using rm95emul & rm95dump
i.e. two dos mode routine able to dump to a file
the 16 registry pages of any Sony device and to
change-read registers settings via pc.

My research was started by a flash error
om my s70 an from the request of 180$ for
changing a byte value from sony services....
;-)))


I saw (thanks acem77) was possible to
build a parallel-minijack cable with
a couple of dollars ad use the same tools
made by people interested in enabling
the dv-in in the sony videocameras.

What we can do controlling the 16 pages of
registry ? Well first of all a lot of damages...

So the first operation is to take a dump on file
of your camera, please note any camera has different
dump, even if comparing same models.

Think about on some pages of this dump there are the
ccd faul error corrections that are specific for any ccd...


I would like to create a database of these dumps,
foe any Sony Models, so that we can help us each other
on researching useful settings....

Sony use quite a lot of similarities even in
very different models, so the reverse engineering
of settings of one model can help the rev eng of others.

What are the benefits? Well up to now I was able to fix flash
errors E:90:91 at zero cost, enabling two new formats on my S70
and introducing an icon on the menu for controlling the focus
as usually do the focus button.

I can also enabling a bar color pattern, a grey bar pattern
shooting photos via pc, changing the lcd bright, color saturation
etc etc etc..........

An important disclaimer for Mr Sony.
I like your products
My aim is just to enhance my photos,
and my beloved camera capabilities.
nothing else than this.

End Of Part 1


For the interested people please do
not esitate to contact me, but before
to do this, give a look to some links:

(Schema cable)
http://www.angelfire.com/ab2/DVinSony/

(Manuals for Sales)
http://servicemanuals.net/index.html

(Dvin-lanc stuff)
http://lea.hamradio.si/~s51kq/DV-IN.HTM
http://www.hardwareanalysis.com/action/printarticle/1464


(Programs)
http://stanza.techfocus.net/camera/rm95.zip



--------------------------------------------------
--------------------------------------------------

From what I get from the 707
dump, also in this case is possible
to change the 5 predefined photo formats
acting on five addresses on page 0d.

In this case the target
locations are
22,23,24,25,26
default values
01 04 08 8A 0A

This means the 707 uses
640x480
1280x960
2048x1536
2560 (3:2)
2560x1920

And You can pick up other stuff
following the table below...

REMEMBER TO COMPENSATE THE XOR
CHECKSUM USING a DUMMY BYTE
(3E or 3F are probably candidates)

FORMULA:
CA-New = (TA-Old XOR TA-New) XOR CA-Old

TA-Old = Target Address Old Value
TA-New = Target Address New Value
CA-Old = CheckSum Address Old value
CA-New = Chechsum Address New value


FORMAT TABLE

Hex Binary Format Type
-------------------------------
(00)--00000000--> NOT USED
(01)--00000001--> 640x480
(02)--00000010--> 1024x768
(03)--00000011--> 1216x912
(04)--00000100--> 1280x960
(05)--00000101--> 1472x1104
(06)--00000110--> 1600x1200
(07)--00000111--> 1920x1440
(08)--00001000--> 2048x1536
(09)--00001001--> 2304x1728
(0A)--00001010--> 2560x1920
(0B)--00001011--> 1856x1392
(0C)--00001100--> 2240x1680

(80)--10000000--> NOT USED
(81)--10000001--> 640 (3:2)
(82)--10000010--> 1024 (3:2)
(83)--10000011--> 1216 (3:2)
(84)--10000100--> 1280 (3:2)
(85)--10000101--> 1472 (3:2)
(86)--10000110--> 1600 (3:2)
(87)--10000111--> 1920 (3:2)
(88)--10001000--> 2048 (3:2)
(89)--10001001--> 2304 (3:2)
(8A)--10001010--> 2560 (3:2)
(8B)--10001011--> 1856 (3:2)
(8C)--10001100--> 2240 (3:2)

KK


------------------------------------------
------------------------------------------

Well ..second episode... First of all thanks to
Thaar for his bravery and the dump of a 707....
Now I can really start to focus a bit my studies,
analysing the similarities
between firmware of Cybershots Cameras.......
If someone wants to send me as gifts some
sony cameras...no problems I will appreciate it
:-)

My data will be NOW based over DSCS70 and partially the DSC707.

I'm trying to convince my friend to let me
'operate' over his P12 ....but he's worried
about my strange activities....

Firmwares setting of 707 or S70 are splitted
into 16 pages... from 00 to 10hex..

Here the first draft result of my initial analysis..

First of all remember one thing:
Some of Sony Camera Setting are Persistent
even if the Battery is disconnected..some not..

Exposure level is RAM based...disconnect the battery
and You will loose the setting.......


Photo Size Format is EEPROM based...disconnect the battery
and You will NOT loose the setting..........
FLASH ERROR and ARE....EEPROM BASED
;-)))

NOTE ONUSE OF THE EMULATOR VIA LANC
CABLE AND A PC IN DOS MODE

The RM95EMUL SOFTWARE is a very simple emulator...
Just 6 buttons and a a WRITE FUNCTION

A- Move ONE PAGE DOWN
S- Move ONE PAGE UP

D-Move one Address Down
F-Move one Address Up

G-One bit Decrement of pointed address(In RAM)
H-One bit Increment of pointed address(IN RAM)

W-Write current location value into EEPROM CAMERA

HERE THE FIRST DRAFT PAGE DESCRIPTION
-------------------------------------
Page00
Master Registry Page.
Up to now the only relevant
address on this page is the address 01
If You set it to 1 all the other pages are unlocked.
If not You cannot set any registry.

Page01
This Page is LOCKED AN IS USED
FOR REPAIR ADJUSTING PURPOSES

Page02
THIS PAGE CONTAINS MOSTLY RAM UNPERSISTENT SETTING
LIKE AE Programs, Flash Levels,Exposure Levels etc etc.
Is probably not completely mirrored in any eeprom....take away the
battery and this page is almost completely re defaulted to standard
settings....

Page03
MOSTLY UN-USED

Page04
UNKNOW

Page05
TEST FUNCTIONS?,
on my S70 , address 1F
controls the generation of
color bar monitor,grey scale etc etc...

Page06
UNKNOW

Page07
HOT PAGE DO NOT TOUCH, IT CONTAINS
FACTORY CCD WHITE\BLACK ERROR compensations

Page08
EMPTY PAGE

Page09
UNKNOW

Page0A
EMPTY PAGE

Page0B
UNKNOW

Page0C
EMPTY PAGE
Page0D
THIS PAGE CONTAINS MOSTLY EEPROM PERSISTENT SETTING
LIKE PHOTO FORMAT, MENU DEFINITIONS PHOTO NUMBERS etc etc.
I was\will publish some settings for this fundamental page...

Basically you can start to play with this page, with your camera
switched on. If Youdo not press 'W' the change of an address content
disappear when you move to a previous or next page\address.
Some of this page settings are xor checksum controlled...
For instance addresses 20 21 22 23 24 selects the photo size....

Page0E
UNKNOW

Page0F
THIS PAGE Contains Lens\Shiutter Mechanism & Withe balancing
settings and is camera dependent,every camera has different values


A lot of work still to do....
;-))

See You Soon
KK
---------------------------------------------------------------------
---------------------------------------------------------------------

Third episode...

I'm quite happy.

My initial & main purpose was to
trow a stone in the sony camera swamp...
(Italian saying) without any illegal action.

I bought my camera and I
can do whatever damage I
want to her.... It's mine !

I think this thing is happening,
and people are beginning to having fun
starting to think their cameras
have a...beatiful mind... somewhere....

I think also Sony services will have
potentially a lot of fun with
cameras with brain damages ;-)))))))

.
..
...
Seriously ,I'm enjoying a lot the
possibility to re-discover my camera,
thinking now it's simply ..
a 'Unique' piece...

Now i'm shooting at 1/2000 in 1024x768
fitting 180 photos into a 64Mb MemStick
:-))))))))))))

Generally speaking..
I will try to build a little website
collecting all the info I will
get for a creating a personal
quick reference.

Thanks to people who sent me

707
717
V1
dumps..

Remember, these dumps are not the camera firmware,
but the registry set of the firmware , i.e. like
a sort of windows registry.

Sony V1 can upload the whole firmware,
via mstick, see the Sony supportWeb site.
(At your risk ;-)

I will review them but I need some help and some
spare time on it ..and most important , someone
brave enough to try the setting modifications
on his own camera from mine, or someone that
will gift me some cameras ;-))))))))))))

I would like to get S75 S85 dumps also,
very similar to s70.

I still have to verify lanc connection
availability on Px series..

There are some future plans for moving
the current Lanc interface on a serial
Win32 compatible interface, using schemas
like that:
http://www.dreamvideo.it/elettronica/sch_lanc_2.htm,
but not for the immediate...

IMPORTANT!
For changing\experimenting registry values
you need possibly the service manual,
and a dos mode pc starting the stuff via
bootable dos diskette,
and not via dos emulation.

There is a program called dv-in lite
able to work with Win95 98 , but again,
the problem is the parallel connection,
timing, always a nightmare on xp , nt
without a dedicate driver...

Remember the fundamental rule of
MAKING A DUMP before thinking to
operate on the registries.

See you soon
KKPrince

----------------------------------------------
----------------------------------------------